Porta Puller Instructions (American Power Pull EZ2000)

Note: The poorly written the Porta Puller (EZ2000) operating instructions are printed in faint, miniscule text. Here's what I've inserted into the box for emergency use.

Raise the Handle

Straighten the handgrip and push the handle cylinder’s slot fully down over the spring-loaded button.

Do not use the holes in the cylinder. They have no purpose.

Unreel the Cable

Put the control lever (Up/Down Switch) into the forward position towards the long cable end.

Disengage the retainer pawl underneath by holding the lever (tail) of the retainer pawl against the frame, freeing the ratchet wheel to spin freely.

Tighten the Cable

Put the control lever (Up/Down Switch) into the reverse position towards the clevis end and away from the cable.

Pull the handle.